Pictured above is a sample voltage reading from the accelerometer output pins. The top waveform (purple) corresponds to the lower 8 bits of data, while the bottom waveform (orange) corresponds to the upper 8 bits of data. The numbers are read into the microprocessor and are combined together to form the complete accelerometer reading.
Below, is an image of our custom-designed PCB (printed circuit board).
5/12/2010 - Final Report Complete
5/8/2010 - Senior Design Night
5/6/2010 - Faculty Review Meeting
4/23/2010 - CEAC Review Meeting
4/19/2010 - Final report draft complete
4/12/2010 - Functioning prototype
4/10/2010 - Prototypes built
4/09/2010 - PCBs arrived!
3/31/2010 - Won Calvin BizPlan Competition
12/11/2009 - PPFS Complete
12/05/2009 - Streaming Accelerometer Data
12/04/2009 - Interfacing with Accelerometers
11/16/2009 - Gyroscopes Arrived
10/15/2009 - Website Posted
10/12/2009 - Development Kit Received
10/09/2009 - Poster Completed
10/07/2009 - Accelerometers Arrived